Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

fax busy tone

Hi all ,

People are tryin to send fax to our comapny complains they are getting busy tones  . Here is my confiuration on the gateway .The ip address in the

configuration are for interaction server (the server process the fax) .

voice gateway is Cisco 2821

PSTN connectivity :, PRI

Please help .

dial-peer voice 899 voip

destination-pattern 2xxx8425

session protocol sipv2

session target ipv4:192.168.2.10:5062

dtmf-relay rtp-nte

codec g711ulaw

fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco

no vad

!

Everyone's tags (2)
2 REPLIES

Re: fax busy tone

Your destination pattern should be 2... Not 2xxx and try your dtmf-relay as h245 alphanumeric. Also can you give us a debug voice dialpeer inout on such a fax call

Sent from Cisco Technical Support iPhone App

Voice CCIE #37771
Community Member

Re: fax busy tone

Hi

Sorry for the  confusion

Pattern actually i masked , it s  full number

124
Views
0
Helpful
2
Replies
CreatePlease to create content