This is a known hardware problem with the ATA interop'ing with the HP MFP's.
There is another common issue with the external ring tone as well. Please try calling from an IP phone to see if the MFP will answer. If it does, it's an issue with the 'external ring tone' that the newer ATAs play.
If it does not, you're hitting a hardware defect on the ATA: CSCsx42454
The hardware is still being worked out/distributed, but it is a known issue. If you have an older ATA with the INMxxxxxxx serial number, this will work properly.
Unfortunately TAC could not RMA me any ATAs with a serial number that starts with INM. The logistics dept. sent me another ATA with the serial number starting with FCH. I guess we will try the Ring Voltage Booster II off the sandman.com website.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...