Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

fax machine on fxs port

Hi All

i have a 2800 router with a fxs port connected with a fax machine. also have couple of ipphones connected to receive calls from PSTN.

config

ephone-dn  16  dual-line

number 312

label Office

description Office

name Office

call-forward busy 800

call-forward noan 800 timeout 22

voice-port 0/0/0

supervisory disconnect dualtone mid-call

supervisory custom-cptone tac

no battery-reversal

timeouts call-disconnect 2

timeouts wait-release 2

connection plar opx 312

description <<<<  Office No.  02088885312  >>>>

caller-id enable

voice-port 0/3/0

timeouts call-disconnect 2

timeouts wait-release 2

description Fax Machine

station-id number 312

caller-id enable

dial-peer voice 6 pots

destination-pattern 312

port 0/3/0

as per this config i know this DN taking priority over fax and only dialing ipphones. here im using same number for fax and ephone.

is there any other way to achive this.

USING SINGLE LINE TO RECEIVE BOTH CALLES AND FAXES.

is it possible. i know we can achive this by TCL script, but any other simple ways

thanks

shameer

Everyone's tags (3)
448
Views
0
Helpful
0
Replies