Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Fax on-ramp on FXO port

Hello,

I've got 2811 (IOS 12.4) with 8 port FXO module as branch VoIP gateway.

FXO ports are connected to PSTN.

I'm trying to implement Fax to Email (fax on-ramp) option.

My config is shown below

voice translation-rule 1

rule 1 /^$/ /3323238/

!

voice translation-profile DNIS-Replace

translate called 1

fax receive called-subscriber SUBSCRIBER

fax interface-type fax-mail

mta send server server.domain port 25

mta send subject Incoming fax

mta send filename Fax-mail date

mta send postmaster user@domain

mta send mail-from hostname XXX

mta send mail-from username XXX

mta send return-receipt-to hostname XXX

mta send return-receipt-to username XXX.YYY

!

application

service faxmail_onramp flash:app_faxmail_onramp.2.0.1.3.tcl

!

!

voice-port 1/0/8

translation-profile incoming DNIS-Replace

cptone RU

caller-id enable

dial-peer voice 3323238 pots

service faxmail_onramp

incoming called-number 3323238

direct-inward-dial

port 1/0/16

dial-peer voice 140 mmoip

service faxmail_onramp out-bound

destination-pattern 3323238

information-type fax

session target mailto:BRANCH@domain

incoming called-number 3323238

mdn

dsn delayed

dsn success

dsn failure

The issue. When I'm calling to number 3323238 FXO port goes to off-hook state.

I hear 2 beeps and then - silence than call terminates on timeout.

debug fax foip all, sh call history fax - shows nothing

from the output of "deb voip ccapi inout"

I can see that

CCAPI handed cid 1406 with tag 3323238 to app "_ManagedAppProcess_faxmail_onramp"

What's going wrong?

4 REPLIES
Cisco Employee

Re: Fax on-ramp on FXO port

Try adding 'connection plar 3323238' under the voice-port 1/0/8' to enable single stage dialing and for the call to match on the POTS dial peer that runs the onramp application and then be sent to the mmoip dial peer.

New Member

Re: Fax on-ramp on FXO port

Hello Paul,

Thank you for reply.

I've tried to create configuration with connection plar in the voice port and pots dial peer that matches number from plar.

This configuration didn't work.

New Member

Re: Fax on-ramp on FXO port

voice-port 1/0/8

cptone RU

timeouts call-disconnect 1

timeouts wait-release 2

connection plar 7777

caller-id enable

dial-peer voice 7777 pots

service faxmail_onramp

destination-pattern 7777

port 1/0/16

forward-digits all

dial-peer voice 140 mmoip

service faxmail_onramp out-bound

destination-pattern 7777

information-type fax

session target mailto:USER@domain

incoming called-number 7777

mdn

dsn delayed

dsn success

dsn failure

====================

deb voice application callsetup output

[...wide debug output omitted...]

Feb 22 19:56:08: //10//Dest:/AFW_M_Destination_Initiate:

Feb 22 19:56:08: //10//Dest:/AFW_M_Destination_Initiate: Outgoing guid : 479B6A32.E0A611DC.801D97D2.54CD2456

Feb 22 19:56:08: Incoming_guid : 00000000.00000000.00000000.00000000

Feb 22 19:56:08: //10//Dest:/DestSetupInitiate:

Feb 22 19:56:08: //10//Dest:/DestMatchDialPeer:

Feb 22 19:56:08: //10//Dest:/DestQueuePeers: Matched peers:

Feb 22 19:56:08: //-1//Dest:/DestQueuePeers: 140

Feb 22 19:56:08: //-1//Dest:/DestQueuePeers: , Total(1)

Feb 22 19:56:08: //10//Dest:/DestDialPeerRotary:

Feb 22 19:56:08: //10//Dest:/DestOutboundCallUsingPeer: dest(7777), numexpDest(7777), numDestDigits(1)

Feb 22 19:56:08: //10//Dest:/DestOutboundCallUsingPeer: prefix(), peer tag(140)

Feb 22 19:56:08: //10//Dest:/DestHandoffOutboundApp:

Feb 22 19:56:08: //10//Dest:/DestHandoffLeg: target app [faxmail_onramp], instance []

Feb 22 19:56:08: //10/479B6A32801D/CCAPI/ccCallApp:

====================

and nothing... Just silence, no fax signals.

May be something goes wrong wit tcl script?

New Member

Re: Fax on-ramp on FXO port

I did it!

Here is working config

application

service fax_on-ramp flash:app_faxmail_onramp.2.0.1.3.tcl

!

service fax_detect flash:app_fax_detect.2.1.2.2.tcl

voice-port 1/0/16

no vad

cptone RU

timeouts call-disconnect 1

timeouts wait-release 2

connection plar 3323238

caller-id enable

dial-peer voice 100 pots

service fax_on-ramp

information-type fax

incoming called-number 3323238

direct-inward-dial

port 1/0/16

forward-digits all

dial-peer voice 200 mmoip

service fax_on_vfc_onramp_app

service fax_on_vfc_onramp_app out-bound

max-conn 1

destination-pattern 3323238

information-type fax

session target mailto:USER@DOMAIN

incoming called-number 3323238

473
Views
0
Helpful
4
Replies
CreatePlease to create content