Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Fax Relay AS 5300

Hello,

I'm having problems completing fax calls. I have these dialpeers configured:

dial-peer voice 9999 voip

incoming called-number #1..........

dtmf-relay rtp-nte

fax-relay ecm disable

fax rate 14400

fax nsf 000000

fax protocol t38 ls-redundancy 5 hs-redundancy 0 fallback none

no vad

dial-peer voice 1111 pots

tone ringback alert-no-PI

destination-pattern #1..........

progress_ind setup enable 3

forward-digits 10

This is the output of command: debug fax relay t30 all-level-1

Oct 1 20:53:00.569: 2:D (1327887) 1197092002 fr-entered (10ms)

Oct 1 20:53:01.274: 2:D (1327887) 1197092708 fr-msg-det NSF

Oct 1 20:53:02.184: 2:D (1327887) 1197093618 fr-msg-det NSF

Oct 1 20:53:02.877: 2:D (1327887) 1197094308 fr-msg-det CSI

Oct 1 20:53:03.598: 2:D (1327887) 1197095028 fr-msg-det DIS

Oct 1 20:53:08.306: 2:D (1327887) 1197099728 fr-msg-det NSF

Oct 1 20:53:09.215: 2:D (1327887) 1197100638 fr-msg-det NSF

Oct 1 20:53:09.908: 2:D (1327887) 1197101328 fr-msg-det CSI

Oct 1 20:53:10.629: 2:D (1327887) 1197102048 fr-msg-det DIS

Oct 1 20:53:17.517: 2:D (1327887) 1197108928 fr-msg-det NSF

Oct 1 20:53:18.418: 2:D (1327887) 1197109828 fr-msg-det NSF

Oct 1 20:53:19.119: 2:D (1327887) 1197110528 fr-msg-det CSI

Oct 1 20:53:19.840: 2:D (1327887) 1197111248 fr-msg-det DIS

Oct 1 20:53:26.732: 2:D (1327887) 1197118128 fr-msg-det NSF

Oct 1 20:53:27.633: 2:D (1327887) 1197119028 fr-msg-det NSF

Oct 1 20:53:28.334: 2:D (1327887) 1197119728 fr-msg-det CSI

Oct 1 20:53:29.056: 2:D (1327887) 1197120448 fr-msg-det DIS

Oct 1 20:53:32.413: 2:D (1327887) 1197123798 fr-msg-det DCN

Oct 1 20:53:33.102: 2:D (1327887) 1197124488 fr-pkt-loss 9

What seems to be the problem?

Thanks in advance.

Regards.

GH

1 REPLY

Re: Fax Relay AS 5300

The originating fax machine doesn't appear to be responding with a DCS.

Not sure why - fax machine are odd creatures.

-nick

149
Views
0
Helpful
1
Replies