I have two callmanager clusters one running 4.2 and one running 6.1. We have been asked to forward two numbers (one on each cluster) which are currently analogue ports on a vg224 connected to a standard fax to an international fax server.
When we introduce the divert it stops the faxing from working.You here the tone (divert is working) but the faxes fail to send.
Faxing from the standalone fax machine in each cluster to the international number works and faxing into each cluster to the standalone fax works.
It seems that the "hairpin" of looping the fax back out is breaking it.
I have tried using a translation pattern and also call forward all off an analogue port on the VG224.Neither seems to work.
Has anyone tried this or have any tips on how to get it to work.
I think what you need is a CTI Route Point that is set to CallFwdAll to the external number. And that CTI Route Point needs a Media Resource Group List that includes has Media Termination Point configured and available. I beleive the MTP is the key to getting this working. Let me know how this turns out.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...