Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

faxes fail inbound

i am able to send faxes outbound but inbound from the pstn fail. i can hear the fax machine recieving the call , but

there is only one negotiation and it stops here is the mgcp config. wondering if i am missing something....

ccm-manager fallback-mgcp

ccm-manager redundant-host 10.16.1.32

ccm-manager mgcp

no ccm-manager fax protocol cisco

ccm-manager music-on-hold

ccm-manager config server 10.16.1.32

ccm-manager config

!

mgcp

mgcp call-agent 10.16.1.33 2427 service-type mgcp version 0.1

mgcp dtmf-relay voip codec all mode out-of-band

mgcp rtp unreachable timeout 1000 action notify

mgcp modem passthrough voip mode nse

mgcp package-capability rtp-package

no mgcp package-capability res-package

mgcp package-capability sst-package

no mgcp package-capability fxr-package

mgcp package-capability pre-package

no mgcp timer receive-rtcp

mgcp sdp simple

mgcp fax rate 14400

mgcp fax t38 inhibit

mgcp fax t38 gateway force

mgcp rtp payload-type g726r16 static

mgcp bind control source-interface Loopback0

mgcp bind media source-interface Loopback0

!

mgcp profile default

1 REPLY
Bronze

Re: faxes fail inbound

It looks like cable problem, paste debug ccapi inout, sh run and sh ver

139
Views
0
Helpful
1
Replies
CreatePlease to create content