Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Silver

faxing vg224

Has anyone got a tested set up for a MGCP vg224. We are having problms with inbound- no clock slips. The calling fax machine is ringing but there does not seem to be any exchange of tones so they do not move from a Voice call to fax. thanks

1 REPLY
Silver

Re: faxing vg224

To configure properly the MGCP Gateway for Fax Pass-Through these commands must be added to the gateway.

no ccm-manager fax protocol cisco

mgcp modem passthrough voip mode nse

mgcp modem passthrough voip codec g711ulaw

http://www.cisco.com/en/US/tech/tk652/tk777/technologies_tech_note09186a0080114565.shtml

http://www.cisco.com/en/US/tech/tk1077/technologies_configuration_example09186a00801ad22f.shtml

http://www.cisco.com/en/US/docs/routers/access/vg224/hardware/installation/guide/hig.html

168
Views
0
Helpful
1
Replies