Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

feature

we have CUCM 6.1 and i need how to Prevent some extension from call any extension only if case the pick up handset go to operator

1 REPLY
Cisco Employee

Hi,Please try the following

Hi,

Please try the following steps.

Step1: Create a Partition PT-PLAR

Step 2: Create a Calling Search CSS-PLAR and add PT-PLAR to this CSS.

Step 3: Create a Translation Pattern with the "Translation Pattern field" blank, this is very important. Then in the "Called Party Transform Mask field" enter the number of the Operator. Assign the PT-PLAR to this translation pattern and also apply a CSS that is able to reach the phone which needs to be called.

Step 4: Assign the CSS created in step 2 to the phone that will make the call. Reset the phone to apply changes. ( It is important that the Line does not contain another CSS since the line has priority over the phone.)

HTH

Manish

 

27
Views
0
Helpful
1
Replies
CreatePlease login to create content