I have 2 sites connected through ADSL bridges. In the main site I have CCME running on a Cisco 2811 and the child site CCME on a 2801. I am using dial-peer to pass calls between sites. I was wondering whether it is possible to use functions such as hunt groups,call transfer,conference call and also sharing of contacts between the two CCMEs. I have been searching all over the internet for this feature but I dont seem to find a lot on this subject.
Thanks for your reply. I dont think you understood my question. I want to be able to transfer a call from a phone connected to the CME of Site A to a phone connected to the CME of Site B. I also want functionality like divert and sharing the phonebook.
My question was to check if it is possible without using Unity.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...