Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Filtering an inbound number on a PRI

Is there an easy way to filter an inbound number on a PRI. We are receiving harrassing phone calls on the three main numbers for our reception desk, and they always come from the three phone numbers the harrasser has, home, work and cell.

Running MGCP at all sites so not sure we want to switch to H.323 to try to use translation rules.

1 REPLY
Cisco Employee

Re: Filtering an inbound number on a PRI

MGCP relies all call control to CUCM, CUCM does not uses ANI for routing purposes, only called number

It's H323 you need

Reject Calls

http://www.cisco.com/en/US/partner/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml#reject

Call Blocking Configuration Examples

http://www.cisco.com/en/US/customer/tech/tk652/tk90/technologies_configuration_example09186a00803f818a.shtml#con11

ask your telco if they have anything on their side to do this

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
240
Views
0
Helpful
1
Replies
CreatePlease login to create content