Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Flash "key not available here"

I've got a CCME where the phones display the Flash softkey, but when pressing it, it displays key not available. How do I make it available?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Flash "key not available here"

this is used if you have call waiting available on a POTS line. Under telephony-service utilize the command "fxo hook-flash"

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_f1ht.html#wp1023105

Note that once a flash soft key has been enabled on an IP phone, it is available to provide hookflash functionality during all calls except local IP-phone-to-IP-phone calls

1 REPLY

Re: Flash "key not available here"

this is used if you have call waiting available on a POTS line. Under telephony-service utilize the command "fxo hook-flash"

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_f1ht.html#wp1023105

Note that once a flash soft key has been enabled on an IP phone, it is available to provide hookflash functionality during all calls except local IP-phone-to-IP-phone calls

204
Views
0
Helpful
1
Replies