Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Force Authorization code in CME

Dear all,

i need help is there any way to configure FAC in CME 7.0.as i need to block international access on pots & voip dail peers  using FAC code  all the time not only after office hrs.

i have gone through all the doc related to call blocking but while configuring the same. i face below mentioned issue

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeblock.html

1)  how can I block the dial peer for all times. The option I have is to restrict only during specified timings.

2) According to the document I configured "login" in the template, and the login does work, but it does not matter whether I am logged in or not, the calls are still going through.

I would appreciate if some one has alreday done this & help me out ..

5 REPLIES

Force Authorization code in CME

Hi there,

Forced Authorization Codes were introduced in CME 8.5 and later:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmefac.html#wp1011721

Feature Name

Cisco Unified CME Version

Modification

Forced Authorization Code

8.5

Introduced the FAC feature.

HTH,

Chris

Community Member

Force Authorization code in CME

I know this feature is avialable in 8.5 version , but is there any workaround for this in 7.0 version.

Blue

Force Authorization code in CME

Hi

As a workaround, You can use script mentioned in below link. Name of script is " Clid_authen_collect.tcl "

http://www.cisco.com/en/US/docs/routers/access/as5350/software/feature/guide/pull_ivr.html#wp1021162

Please note :- The scripts are not supported by TAC.

regards

Ronak Patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
Community Member

Force Authorization code in CME

Thanks Ronak for your valuable inputs..

but when i try to put below mentioned cmmd in my cme  router there is no such cmmd available my CME IOS verison is 15.0 M7

call application voice

Blue

Force Authorization code in CME

hi

Command is changed use following command.

Router(config)#application

Router(config-app)# service ?

Regards

Ronak Patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
720
Views
0
Helpful
5
Replies
CreatePlease to create content