Do you know if it's possible to force DTMF Transport using RFC2833 in CUCM 8.0 with a SIP third party device, although it doesn't offer it as an option (in SDP)?
I'm looking for a function like the hidden command "voice-class sip dtmf-relay force rtp-nte" in IOS voip dial-peers, but for CUCM 8.0.
voice-class sip dtmf-relay force rtp-nte --> A hidden command that forces the “voice-class sip dtmf-relay force rtp-nte” DTMF relay negotiation to rtp-nte and It’s only necessary if the other side doesn’t advertise rtp-nte
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...