Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Force the Outbound caller id to a particular number

In our office we would like to force the caller id on all out bound calls to be a particular number. Is there a way to do that simply? Apparently the Telco is saying that I should be able to.

We are using Call manager express version 4.0 . IOS Version 12.4(9)T7 and a 10 Channel ISDN PRI Connection.

4 REPLIES
New Member

Re: Force the Outbound caller id to a particular number

You should be able to do it on the route pattern, or you can do it on the Route List page, down at the bottom hit route list details, and it takes you to a place where you can type in the calling party transform mask. Or you can do it on the DN also.

New Member

Re: Force the Outbound caller id to a particular number

Just look for the "calling party transform mask" in those.

Cisco Employee

Re: Force the Outbound caller id to a particular number

since this is CME you need to use translation rules, the above suggestions are for CUCM

Voice Translation Rules

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml

Number Translation using Voice Translation Profiles

http://www.cisco.com/en/US/customer/tech/tk652/tk90/technologies_configuration_example09186a00803f818a.shtml

you need to create a translation tule for outbound calls on which you modify the calling number.

Some telcos offer this, they always send a main number. you could try asking them.

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Force the Outbound caller id to a particular number

My apologies. I guess I missed the express part. Sorry about that guys.

166
Views
0
Helpful
4
Replies