Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Forced Authorization Code on CCME

Hi,

We are running CCME 4.0, is it possible for to configure Forced Authorization Code(FCA)on CCME ?

If yes, please let me know what are the configuration parameters needs to be added on CCME for FCA.

Regards,

5 REPLIES
Hall of Fame Super Gold

Re: Forced Authorization Code on CCME

There is no FAC on CCME like CM has.

If you are trying to limit calls, you have three solutions:

1. use PIN login with afterhours configuration

2. use COR

3. use a secrete prefix to make certain calls and configure your DP with that.

Hope this helps, please rate post if it does!

New Member

Re: Forced Authorization Code on CCME

Hi,

Thanks for your reply.

Please let me know the configuration details or document for configuring 1 & 3 (PIN Login and sectret prefix).

One more clarification: Can we able to get Call Detail Reports on CCME?

Thanks in advance

Regards,

New Member

Re: Forced Authorization Code on CCME

Hi,

Is it true that CCME 4.1 will support FAC?

Regards,

Hall of Fame Super Gold

Re: Forced Authorization Code on CCME

Hi,

for configuring pin login and after-hours, please reference configuration guide on CCO:

http://cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_book09186a00807c5776.html

for 'secret prefix', just config a new DP with destination-pattern ^2345....T

e.g. 2345 is your secret PIN.

CCME is now versions 4.2 and as I mentioned it does not support FAC like CM does.

Thanks for the rating and good luck!

New Member

Re: Forced Authorization Code on CCME

Hi

Some one send me the configuration in attach

I am going to test

I sugets all you to test to and share the results

Brgds

253
Views
4
Helpful
5
Replies