Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Forced authorization code

Is there a way to implement Forced autorization codes in Callmanager express 4.x?

This is really urgent.

Thanks.

3 REPLIES

Re: Forced authorization code

Yes you can

Have a look at this link

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_1/sys_ad/4_1_3/ccmfeat/fsfaccmc.htm#wp15243

[Edit] i didn't read the question correctly and the link applies to CCM as opposed to CCME

HTH

Narayan

Hall of Fame Super Gold

Re: Forced authorization code

With CME there are at least three methods to block calls, two are described in the admin guide and are:

1. login/logout with after-hours blocking.

2. cor list.

The third is that you invent a prefix so that only calls made with it will go through.

Hope this helps, please rate post if it does!

Green

Re: Forced authorization code

You can use a TCL script for doing that, not natively supported. But you need to contact your local Cisco SE to obtain it. Afaik, this feature has been already incorporated and will be supported in the future CME version 4.3...not available yet.

276
Views
0
Helpful
3
Replies
CreatePlease login to create content