cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
412
Views
0
Helpful
2
Replies

forward-all in SRST-modus

antoinemeunier
Level 1
Level 1

Hello,

I have understood that when an IP-phone is falling to SRST mode, the forward all destination that was configured will disappear.

I want to know if it is possible to configure a forward all destination when the IP-phone is in SRST mode?

Do I have to configure something special under the call-manager-fallback option?

Thanks a lot,

Best regards,

Antoine Meunier

2 Replies 2

ronpatel
Level 8
Level 8

Hi

Basically, under call-manager-fallback you will need to set up the alias

command.

The following is the example:

Call-manager-fallback

alias 1 3016921743 to 3016921743 preference 1 cfw "Cell phone number"

timeout 10

With that set up if someone calls the number 3016921743 and if that number

is register to the SRST router the call will be sent to the cell phone

number after 10 seconds.

In the following link you will get some documentation about it.

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/guide/srst_call_handling.html

Regards

Ronak Patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

Hello Ronak,

Thanks for the answer.

However, what I would like to know, is that if users are able to activate a forward all when the IP-phone is in SRST mode, just the same way the do in normal mode.

Thank you,

Best regards,

Antoine

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: