Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Full configuration of MGCP gateway and CUCM V6.0

Hello Sirs,

We have 2 MGCP IOS gateway connected over WAN connection and through PSTN and the Head Quarter is connected with CUCM v6.0

I need the full configuration of the MGCP gateways.

Thanks a lot.....

6 REPLIES

Re: Full configuration of MGCP gateway and CUCM V6.0

Try this:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00807f8b31.shtml

It's not quite CUCM 6.0, but it's as close of a full configuration as I know of. And, they're not that much different.

Who knows, you might learn something :)

hth,

nick

New Member

Re: Full configuration of MGCP gateway and CUCM V6.0

If we want to use H.323 gateway what will be the difference.

Thanks a lot nick.

Cisco Employee

Re: Full configuration of MGCP gateway and CUCM V6.0

WAY different, they're as day and night

Cisco IOS H.323 Configuration Guide

http://www.cisco.com/en/US/partner/docs/ios/12_3/vvf_c/cisco_ios_h323_configuration_guide/old_archives_h323/323confg.html

Cisco IOS H.323 Gateway Configuration for Use with Cisco CallManager

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_tech_note09186a0080094636.shtml

Dial Peer Configuration on Voice Gateway Routers

http://www.cisco.com/en/US/partner/docs/ios/12_3/vvf_c/dial_peer/dpeer_c.html

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Full configuration of MGCP gateway and CUCM V6.0

Sorry java,

i cant get access to this links

Hall of Fame Super Silver

Re: Full configuration of MGCP gateway and CUCM V6.0

Hello Tito,

you may need to change

/US/partner/ in /US/customer/ in all the URLs

this depends on your CCO account

Hope to help

Giuseppe

Re: Full configuration of MGCP gateway and CUCM V6.0

Hi Tito,

With MGCP, you can use autoconfiguration and CUCM controls the dial plan. In a way, all of the voice stuff that happens goes way over the router's head, and it doesn't see much at all.

In H323, the router does everything. It controls all of the dial plans, IP addresses, translation, signaling options, blocking of calls, everything.

MGCP can be implemented on a gateway in 3-4 lines of configuration.

H323 will be around 30 for a simple setup, possibly hundreds for something more involved. Plus, it will be much more troubleshooting if you don't know what you're doing.

If you'd like more details, you can start clicking and looking at java's links.

hth,

nick

150
Views
0
Helpful
6
Replies
CreatePlease to create content