I have been following the guide and there is something that isn't clear. Is the full directory setting mapped to the ldap settings on the cucm? if i have added a local user manually on cucm will this not show on the full directory of the auto-attendant console?
I have already configured the settings on server to sync contacts.
Yes, all End Users (not Application Users) from CUCM should appear in the CUxAC directory provided that it meets any rules you have configured. By default it should pull everything over. This does not happen in realtime so you may need to force a sync, most commonly through a service restart.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...