Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FXO accept multiple DDI?

Hi everybody,

I am a newbie in telephony, here is a question

Situation: Telco --- FXO --- CME --- IP phone

by following the guide in cisco,

connection plar opx 1001

The IP phone with DN 1001 rings, that works correctly

-----------------------------------------------------

I thought the "connection plar opx" is similar to "destination-pattern"

then I tried to configure

connectin plar opx 100.

and then try to call 1001 or 1002, both results are failed

Do I make any mistake here?

Thanks in advacne

Sam

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

FXO accept multiple DDI?

Configuring Call-Coverage Features

There's no way you can reach both phones as you don't have 2 DIDs, you have ONE number as it's an FXO.

Either you configure one of the options from the link above, or you'll need a BACD to then dial the DN and reach them directly, OR, get another FXO.

You get only ONE number assigned to the FXO, then you map it to ONE internal DN who will be reached when calls to that FXO arrive.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
5 REPLIES

FXO accept multiple DDI?

Unsure what you are trying to achieve, please attach your configuration.

also try this example config:

http://www.cisco.com/en/US/tech/tk1077/technologies_configuration_example09186a00800942a5.shtml



=============================
Please remember to rate useful posts, by clicking on the stars below. 

=============================

Please remember to rate useful posts, by clicking on the stars below.

New Member

FXO accept multiple DDI?

Thanks for the reply, but it seems a T1 setting.

Cisco Employee

Re: FXO accept multiple DDI?

No, connection PLAR is not similar to destination pattern, thats the DN that will be reached when a call comes into that FXO. If theres no 100 DN, of course it will fail.
If you want to rach both phones, there are plenty of options, but thats not one.

Sent from Cisco Technical Support iPad App

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

FXO accept multiple DDI?

I thought the

"connection plar opx 100." should reach 1000 - 1009.

What do you mean by plenty of options, if I want to reach both phones on one FXO port and in different DID?

Thanks in advance

Cisco Employee

FXO accept multiple DDI?

Configuring Call-Coverage Features

There's no way you can reach both phones as you don't have 2 DIDs, you have ONE number as it's an FXO.

Either you configure one of the options from the link above, or you'll need a BACD to then dial the DN and reach them directly, OR, get another FXO.

You get only ONE number assigned to the FXO, then you map it to ONE internal DN who will be reached when calls to that FXO arrive.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
205
Views
5
Helpful
5
Replies
CreatePlease login to create content