01-29-2007 09:43 AM - edited 03-14-2019 07:47 PM
Hi,
i had install ccm4.1 and fxo's using mgcp every thing s fine i can make call and recive calls as well. The problem issue that i face is when the caller from the PSTN calls and then hangup the phone is kept ringing until i pickup the phone.
thanks
01-29-2007 12:35 PM
On the gateway trying using disconnect supervision under the voice-port configuration.
01-29-2007 12:36 PM
Hi,
This sounds like an issue with disconnect signalling. Check out this document:
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide