Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FXO cards generating fax tone

Hello,

We have an FXO card in a 2811 router taking calls from the PSTN and routing them to Call Manager 5.1. Recently users are complaingng that random inbound calls are ringing to the phone as they should but that on some calls both parties can hear what they are describing as "fax machine sounds" when called party picks up. CM user can call them right back with no problems. Never an issue on outbound calls.

Anyone seen this before?

Thanks in advance! All replies rated!

1 REPLY
Bronze

Re: FXO cards generating fax tone

If the FXO supervisory disconnect tone feature is configured and the DSP detects a tone from the PSTN or PBX, the analog FXO port goes on-hook. You can configure the router's FXO voice port to detect supervisory disconnect tones before or after the call is answered.

Try upgrading IOS to version 12.3(8)T.

The following URL may help you:

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml#topic13

108
Views
0
Helpful
1
Replies