FXO: CCM4.2, Gateway H323, Cannot hear the othe side
I am facing a weird problem here; I had configured 3845 Router to be work as H.323 gateway for Cisco Unified Communication Manager 4.2. The interface to the PSTN is FXO - temporarily - until E1 is received.
If I called the Analog line, I can receive the call on an extension, but I cannot hear the calling party (other side)
If I called outside, I can reach my destination but again, I cannot hear the called party (the other side) but he can hear me perfectly. I even cannot hear any progressive tone until the call is answered.
I am not behind a firewall, all the ports are open, Router and CCM are on the same
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...