04-18-2010 08:35 AM - edited 03-15-2019 10:19 PM
Hello,
i have 3845 router with FXO card i have configured FXO as SIP with CUCM 7.1.3 below are my configuration in both ends
i can make out side call to PSTN from my IP Phones but not able to receive calls From PSTN via FXO.
please advise.
GATEWAY SIDE CONFIGURATION:
04-18-2010 11:51 AM
Hi
On the gateway configuration page in CCM, you should set the 'Calling Search Space' to a CSS that includes your internal phones (and extension 4085553001).
If your internal extensions are shorter length set the 'sigificant digits' setting appropriately (i.e. the internal extension is 3001, set it to 4)
Regards
Aaron
Please rate helpful posts..
04-18-2010 01:01 PM
No do not have CSS n PT enable and my DN is 10 digit
Thanks
Firasat
04-18-2010 01:27 PM
Hi
Do a 'debug ccsip messages' on the gateway and see what is happening then...
Aaron
04-18-2010 02:21 PM
I am getting 'SIP/2.0 401 Unauthorized' what does it mean?
Thanks
Firasat
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide