So I have a 2621 with a vic2-fxs and a vic-fxo-m1 (or something like that) in it, doing h.323 to a CallManager 7.1(2) system. I'm noticiting that every few days when you make/recieve calls to the pstn via the fxo port that all the calls are crackling and you can't understand what the other person is saying. If I move the pstn connection to the 2nd port of the fxo it will work fine for a couple days then it too starts having the same problem. If I reboot the router, things are fine again for a few days and then starts acting up again. Any ideas what could be going on here?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...