Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FXO disconnect and TCL-AA

If I transfer outside call to an OPERATOR directly, there is no problem.

But when outside call trasferred to TCL-AA, FXO disconnect problem ocuurs.

I observe the same problem with CUE also

6 REPLIES
Hall of Fame Super Gold

Re: FXO disconnect and TCL-AA

You will likely need a tone detection based configuration:

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml

New Member

Re: FXO disconnect and TCL-AA

I configure tone detection

It works without TCL-AA

With TCL-AA it doesnt work

here is my config, I also attach disconnect tones

voice class custom-cptone TT-ESS

dualtone out-of-service

frequency 2060

cadence 100 100 100 100 100 100 100 100

dualtone disconnect

frequency 450

cadence 600 200 200 200 200 200 200 200

voice-port 2/0/8

supervisory disconnect dualtone mid-call

supervisory custom-cptone TT-ESS

supervisory dualtone-detect-params 1

timeouts call-disconnect 3

timeouts wait-release 3

timing hookflash-out 500

connection plar 8005550123

Hall of Fame Super Gold

Re: FXO disconnect and TCL-AA

Which exact IOS are you running ? There is a bug about that. Try "connection plar opx" as a workaround.

New Member

Re: FXO disconnect and TCL-AA

12.4(11)XW6

My tone detection parameters are correct?

I write them by using cooledit software

I am not sure abouth frequency and cadence?

Are they correct?

My telecom disconnect sequence changes with time;

200 200 600 200 200 200 200 200 ......

or

600 200 200 200 200 200 200 200 ......

does it cause problem

Here is my config?

!

voice class dualtone-detect-params 1

freq-max-deviation 20

cadence-variation 20

!

!

voice class custom-cptone TT-ESS

dualtone out-of-service

frequency 2060

cadence 100 100 100 100 100 100 100 100

dualtone disconnect

frequency 450

cadence 600 200 200 200 200 200 200 200

!

!

application

service queue flash:app-b-acd-2.1.2.2.tcl

param queue-len 10

param aa-hunt1 301

param number-of-hunt-grps 2

param aa-hunt2 302

param queue-manager-debugs 1

!

service aa flash:app-b-acd-aa-2.1.2.2.tcl

paramspace english index 1

param number-of-hunt-grps 2

param dial-by-extension-option 5

param handoff-string aa

paramspace english language en

param max-time-vm-retry 2

param aa-pilot 8005550123

paramspace english location flash:

param second-greeting-time 60

param call-retry-timer 15

param max-time-call-retry 600

param voice-mail 600

param service-name queue

!

voice-port 2/0/8

supervisory disconnect dualtone mid-call

supervisory custom-cptone TT-ESS

supervisory dualtone-detect-params 1

timeouts call-disconnect 3

timeouts wait-release 3

timing hookflash-out 500

connection plar opx 8005550123

Hall of Fame Super Gold

Re: FXO disconnect and TCL-AA

Hi,

You have to know if your tones are correct, I don't even know where are you.

Tone-based disconnection is never very reliable and thta's the reason one should always used ISDN for sure, professional results.

New Member

Re: FXO disconnect and TCL-AA

Hello Recep,

I'm facing the same problem. Was this ever solved?

The call is disconnected fine if the AA transfers it to an extension or the operator.

But if the PSTN caller disconnects in the middle of the menu prompts, the port remains off-hook.

I tried different tones with no changes.

Regards,

Ahmed

391
Views
0
Helpful
6
Replies