Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

FXO disconnect issue with 2811

we have 2811 router with h.323.

we confiugre the voice on it.

we got the disconect issue.

when i call from outline to AA number ,and on hook, after that the phone still ring about 20s,

 

I know we need configure custome disconnet tone, but i did not know which value is it.

 

i find some documnet on cisco web ,,i catch the packet ,but i did not know how to decode it.,and transfer to audio file.

 

i following next website ,and got the packet files.

https://supportforums.cisco.com/discussion/10892466/fxo-ringing-problem

confiugre is following:

trunk group PSTN
!
!
!
voice service voip
 allow-connections h323 to h323
 allow-connections h323 to sip
 allow-connections sip to h323
 allow-connections sip to sip
!
voice class codec 10
 codec preference 1 g729r8
!
voice class custom-cptone neo
 dualtone disconnect
  frequency 425
  cadence 500 500
!
!
!voice-card 0
!
!
application
 service aa flash:/its-CISCO.2.0.2.0.tcl
  param operator 0
  paramspace english language en
  paramspace english index 0
  param queue-len 1
  paramspace english location flash:
  paramspace english prefix en
 !

 

control-plane
!
!
voice-port 0/0/0
 trunk-group PSTN
 supervisory disconnect dualtone mid-call

supervisory custom-cptone neo

 cptone HK

 timeouts interdigit 3
 timeouts call-disconnect 2
 timeouts wait-release 2
 caller-id enable
!
voice-port 0/0/1
 trunk-group PSTN
 supervisory disconnect dualtone mid-call

supervisory custom-cptone neo

 cptone HK
 timeouts interdigit 3
 timeouts call-disconnect 2
 timeouts wait-release 2
 caller-id enable
!
voice-port 0/0/2
 trunk-group PSTN
 supervisory disconnect dualtone mid-call

supervisory custom-cptone neo
 cptone HK
 timeouts interdigit 3
 timeouts call-disconnect 2
 timeouts wait-release 2
 caller-id enable
!
voice-port 0/0/3
 trunk-group PSTN
 supervisory disconnect dualtone mid-call

supervisory custom-cptone neo
 cptone HK
 timeouts interdigit 3
 timeouts call-disconnect 2
 timeouts wait-release 2
 caller-id enable
!
!
!

!
dial-peer voice 9 pots
 translation-profile outgoing fxoout
 service aa
 destination-pattern 9T
 incoming called-number .
 direct-inward-dial
 port 0/0/0
!
dial-peer voice 2100 voip
 description TO CUCM PUB
 preference 3
 destination-pattern 2...
 session target ipv4:10.125.65.131
 dtmf-relay h245-alphanumeric
 no vad
!
dial-peer voice 9000 pots
!
dial-peer voice 11 pots
 translation-profile outgoing fxoout
 service aa
 destination-pattern 9T
 incoming called-number .
 direct-inward-dial
 port 0/0/1
!
dial-peer voice 12 pots
 translation-profile outgoing fxoout
 service aa
 destination-pattern 9T
 incoming called-number .
 direct-inward-dial
 port 0/0/2
!
dial-peer voice 13 pots
 service aa
 destination-pattern 9T
 incoming called-number .
 port 0/0/3
!
dial-peer voice 21002 voip
 description TO CUCM PUB
 preference 2
 destination-pattern 2...
 session target ipv4:10.125.65.132
 dtmf-relay h245-alphanumeric
 no vad
!
!
!
!
telephony-service
 srst mode auto-provision all
 max-ephones 26
 max-dn 30
 ip source-address 10.124.103.129 port 2000
 timeouts interdigit 4
 time-zone 42
 time-format 24
 voicemail 2999
 max-conferences 8 gain -6
 transfer-system full-consult
 secondary-dialtone 9
 create cnf-files version-stamp Jan 01 2002 00:00:00
!

 

 

1 REPLY
New Member

Hi ,should someone help me

Hi ,should someone help me translation the PCM.DAT to audia files?

Many Tks.

 

 

37
Views
0
Helpful
1
Replies