Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

FXO disconnect problem + CME 1861 + ios 12.4(24)

Hi all,

I m using a Cisco 1861 with FXO card connected to the PSTN.

Ø      When I made call, I don’t have a problem ( only some seconds for establishing a call )

Ø      For the received call , I did some tests from my GSM:

When I make a call to number (FXO) the ipphone ring, but if I stopped the call from my GSM, the ipphone still ringing ( 3 ring and stop ).

Please could someone help me to resolve this problem?

See in the attachment the configuration of the router.

Thanks advance

Hicham

2 REPLIES
Hall of Fame Super Gold

Re: FXO disconnect problem + CME 1861 + ios 12.4(24)

This is often asked and would have beed revelad by a search.

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml

Do not use attachments for small files like configs.

New Member

Re: FXO disconnect problem + CME 1861 + ios 12.4(24)

i had the same problem,

check the below thread

https://supportforums.cisco.com/thread/2034865?tstart=0

630
Views
0
Helpful
2
Replies