I know this is an easy question but I'm drawing a blank. I've got a cisco 1861 on IOS 12.4(20) and I'm setting up the FXO ports now. The system works except one issue - when a caller calls inbound to the system but hangs up before someone answers, the 7961 phone still rings. I'm sure it's a problem with the configuration of the voice port but need a little direction. Here is the setup of the port:
I changed the port configuration to the following:
supervisory disconnect dualtone mid-call
connection plar 1001
However, there is still about a 5 second delay from the time the caller hangs up and the time tha the phone stops ringing. This can be very confusing for the people trying to answer the phone. Any suggestions for that?
I've changed the configuration of the connection plar to what you described. There is still a few second delay between the time that the caller hangs up and the time that the phone realizes there is no longer a call coming in. This can lead to confusion when someone picks up the phone and there is nobody there. This can't be normal? Is there any way to get around this? The voice-port config now reads:
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
[toc:faq]CUCM Database Replication is an area in which Cisco customers
and partners have asked for more in-depth training in being able to
properly assess a replication problem and potentially resolve an issue
without involving TAC. This document discusse...