Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

FXO Plar ring time & TCL script for playing announcements

Hi all,

I have two questions regarding playing a plain announcement through an fxo port.

First of all, by default, fxo port opens after 2 rings, i want the port to open as soon as the line starts ringing, but couldn't make it happen. (ring number command, plar / plar opx commands didn't work)

The second question is, how can i play an announcement through this fxo port and disconnect the call? Do you have a simple TCL script that can do this?

Kind Regards,

Baris.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: FXO Plar ring time & TCL script for playing announcements

You'rewlecome, please remember to rate useful posts with the scrollbox below.

4 REPLIES
Hall of Fame Super Gold

Re: FXO Plar ring time & TCL script for playing announcements

1. do you have caller-id enabled ?

2. see disconnect script thta I wrote:

http://pbevila.fastmail.fm/public

New Member

Re: FXO Plar ring time & TCL script for playing announcements

Hi Paolo,

1. yes it was enabled, right after disabling it, the ring duration dropped to one ring.

2. i'm going to test it in my lab, and write back.

Thanks for the valuable information that you've provided.

Regards,

Baris.

Hall of Fame Super Gold

Re: FXO Plar ring time & TCL script for playing announcements

You'rewlecome, please remember to rate useful posts with the scrollbox below.

New Member

Re: FXO Plar ring time & TCL script for playing announcements

sure thing. Thanks.

245
Views
0
Helpful
4
Replies
CreatePlease to create content