I have configured 911 dial peers to route out FXO ports on my 1760 router. When I dial 911 the light on the FXO port briefly lights up for half a second then goes out. It then trys the next FXO port and the same thing happens. I then receive a busy signal.
I have verified that the POTS line is good by plugging in an analog phone and dialing out. I have also tried different IOS versions and swapped out the FXO card with new. Nother seems to help. If you have any advice please post. Thanks in advance.
Thanks for replying. This has been becoming a hi-priority issue with the administration. Below is a copy of the 2 dial-peers I use for 911. 8 is our outside access code. I also attached a current copy of the running config on this router.
dial-peer voice 8911 pots
description ***8911 calls over FXO - Priority 1***
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
[toc:faq]CUCM Database Replication is an area in which Cisco customers
and partners have asked for more in-depth training in being able to
properly assess a replication problem and potentially resolve an issue
without involving TAC. This document discusse...