Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

FXO ports often hangs

Hi,

FXO ports are installed in a H.323 GW and often it hangs after the call due to which we are unable to make calls. Everytime we need to login and shut & unshut the ports to release the ports. Any permanent solution to fix this issue...

Thanks & Regards...

3 REPLIES
Green

FXO ports often hangs

Hi,

This issue appears very often.

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml#topic13

Try configuring your FXO port for the correct CPTONE for your country and apply

supervisory disconnect dualtone mid-call

Cant promise that it works.

Regards

Alex

Regards, Alex. Please rate useful posts.

FXO ports often hangs

Hi,

I tried with the above command and monitored the ports for couple of days. Still the problem persist. CPTONE is set to SA.

Any other solution?

Thanks & Regards,

Raffi...

Hall of Fame Super Gold

Re: FXO ports often hangs

As Alex correctly hinted, configuring cptone is not enough, you need to configure the exact disconnect tones.

There are many threads on the matter if you search this forum.

224
Views
0
Helpful
3
Replies