Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

FXO VIC Unrecognised

I have a 2611XM box with a NM-2V running IOS 2600-spservicesk9-mz.124-12.

After installing a VIC-2FXO-EU card in the V0 slot of the NM I was unable to recognise the new VIC. During a reload I get the following errors;

%GUIDO-1-DAUGHTER_CARD_UNKNOWN: NM-HD in slot 1: VIC card

in subslot 1 has an unkown id of 0x16.

%GUIDO-1-DAUGHTER_CARD_FAILED: NM-HD in slot 1: VIC card i

n subslot 1 initialization failed.

Has anyone seen this behaviour before or is it as I suspect a dead VIC card.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: FXO VIC Unrecognised

Are you sure the NM you have is NM-2V or is it NM-HD-2V ? If its NM-HD-2V, it supports only generation 2 vics (VIC2-2FXO) ...

HTH

Sankar

PS:L please remember to rate posts!

2 REPLIES

Re: FXO VIC Unrecognised

Are you sure the NM you have is NM-2V or is it NM-HD-2V ? If its NM-HD-2V, it supports only generation 2 vics (VIC2-2FXO) ...

HTH

Sankar

PS:L please remember to rate posts!

New Member

Re: FXO VIC Unrecognised

Spot on thanks for the info.

Regards

JOF

147
Views
5
Helpful
2
Replies
CreatePlease to create content