I have a scenario with a fax printer (Konica Minolta c353) connected to one interface VIC3-2FXS/DID (just one of the fxs ports), the calls are forward to VWIC2-1MFT-T1/E1 interface with MGCPAPP (registered in CUCM7.02).
Most of the times we need to reboot the router because the fax line stays busy for long periods of time, and this workaround does not work every time.
What can be the problema here???
IOS: (C2800NM-IPVOICEK9-M), Version 12.4(15)XZ2
ROUTER RUNNING CONFIG:
controller E1 0/0/0
pri-group timeslots 1-31 service mgcp
no ip address
isdn switch-type primary-net5
isdn incoming-voice voice
isdn bind-l3 ccm-manager
no cdp enable
ccm-manager redundant-host 10.88.11.1 10.88.21.1
ccm-manager config server 10.88.31.1 10.88.11.1 10.88.21.1
mgcp call-agent 10.88.31.1 2427 service-type mgcp version 0.1
These are the paths to get to each CCX logs through CLI. They may be helpful if you are having issues accessing RTMT or downloading logs through it.
If you want to download them you have to prefix "file get " and you can add one of the options (re...