Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

FXS Card

If I add an FXS card into a 3845 voice router, are there any DSP consideration?

3 REPLIES

Re: FXS Card

Sure. The router will allocate a certain amount of DSP resources for each analog interface on the FXS card. This allocation occurs on boot up.

HTH.

Regards,

Bill

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

New Member

Re: FXS Card

Thank you for the Reply - Can you tell me how I can tell if I have enough DSP resources for this card?

Re: FXS Card

You can see the number of PVDMs installed (carrier cards for DSP modules) by executing this command:

show diag | i PVDM

You can see the allocation of DSP resources using this command:

show voice dsp group all

HTH.

Regards,

Bill

Please remember to rate helpful posts.

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

428
Views
0
Helpful
3
Replies
CreatePlease to create content