Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FXS ports driving me crazy

It all started out with not be able to receive faxes, but I can not even "call" the FXS ports. I have connected (for troubleshooting) a regular analog phone which (same as the fax) can call out, but it does this with a anonymous number.

If I call the extension from another Cisco IP Phone I receive voicemail or when this is not configured busy tone. I can call other Cisco IP phone extensions, but it does this (again) with a anonymous number

Almost default config from Cisco still does not work, (below)

!

ephone-dn 5

number 301 no-reg primary

label 301

description PhoneA Analog

name PhoneA Analog

call-forward busy 333

call-forward noan 333 timeout 10

!

!

ephone-dn 6 dual-line

number 302 no-reg primary

label 302

description PhoneB Analog

name PhoneB Analog

call-forward busy 333

call-forward noan 333 timeout 10

!

!

ephone-dn 7 dual-line

number 303 no-reg primary

label 303

description PhoneC Analog

name PhoneC Analog

call-forward busy 333

call-forward noan 333 timeout 10

!

!

ephone-dn 8 dual-line

number 304 no-reg primary

label 304

description PhoneD Analog

name PhoneD Analog

call-forward busy 333

call-forward noan 333 timeout 10

!

!

ephone 1

device-security-mode none

video

mac-address ****.8EB0.0000

username "PhoneA"

type anl

button 1:5

!

!

!

ephone 2

device-security-mode none

video

mac-address ****.8EB0.0001

username "PhoneB"

type anl

button 1:6

!

!

!

ephone 3

device-security-mode none

video

mac-address ****.8EB0.0002

username "PhoneC"

type anl

button 1:7

!

!

!

ephone 4

device-security-mode none

video

mac-address ****.8EB0.0003

username "PhoneD"

type anl

button 1:8

1 REPLY
125
Views
0
Helpful
1
Replies