Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FXS qwirkiness..

This is more of a curiosity question than anything.

I've setup an H.323 gateway with 8 FXS/DID ports for faxes. Dialing in and out of the system works fine. But if I'm on one fax line dialing the full 9+7 for one of the other fax lines I get a dialtone.

Is this normal? To prevent dialing an on system number through the PSTN. Or did I miss something in my config?

The dial-peers look like this right now-

dial-peer voice 9712 pots

destination-pattern 9712

Port 0/2/0

Thanks for your input.

Justin

1 REPLY
Hall of Fame Super Gold

Re: FXS qwirkiness..

What can be happending is that you're hitting the default incoming DP that doesn't have "direct-inward-dialing. To prevent that do:

dial-peer voice 1 pots

incoming called-number 1

direct-inward-dialing

Hope this helps, please rate post if it does!

89
Views
0
Helpful
1
Replies