05-20-2008 11:43 AM - edited 03-15-2019 10:46 AM
Hi
In CME or CCM it's possible the secondary dial-tone in FXS interface?
The call it's fine and translate too, but don't have the secondary dial-tone.
Thanks
05-20-2008 11:49 AM
Supposedly if you configure the port in SCPP mode, at least for CME, you should have secondary dial-tone.
05-20-2008 11:53 AM
Hi Bevilacqua.
voice-port 0/0/0
cptone BR
timeouts interdigit 3
timeouts call-disconnect 0
timeouts wait-release 5
description ## RAMAL 1510 ##
dial-peer voice 1510 pots
description ## RAMAL 1510 ##
destination-pattern 1510
port 0/0/0
So, where I configure the voice-port like SCCP?
Thanks
05-20-2008 12:14 PM
Basic config:
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t2/ht1vg224.html
Then add features:
http://www.cisco.com/en/US/docs/ios/12_4/12_4x/12_4_6xe/htfeatmd.html
Your FXS ports will behave like ephones.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide