Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FXS Secondary dial-tone

Hi

In CME or CCM it's possible the secondary dial-tone in FXS interface?

The call it's fine and translate too, but don't have the secondary dial-tone.

Thanks

3 REPLIES
Hall of Fame Super Gold

Re: FXS Secondary dial-tone

Supposedly if you configure the port in SCPP mode, at least for CME, you should have secondary dial-tone.

New Member

Re: FXS Secondary dial-tone

Hi Bevilacqua.

voice-port 0/0/0

cptone BR

timeouts interdigit 3

timeouts call-disconnect 0

timeouts wait-release 5

description ## RAMAL 1510 ##

dial-peer voice 1510 pots

description ## RAMAL 1510 ##

destination-pattern 1510

port 0/0/0

So, where I configure the voice-port like SCCP?

Thanks

Hall of Fame Super Gold

Re: FXS Secondary dial-tone

473
Views
0
Helpful
3
Replies