Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

FXS timeout?

I have a few 2851's with 4 port FXS cards. The FXS cards plug into fax machines. When a call placed to one of the fax machines is overwith, and the calling party disconnects, the FXS port on our router is stuck in "connected" status for 45 seconds. Afterwards it changes to "onhook" and waits for another call to come in.

Is there any way to change this?

Other info: We're running Callmanager 4.2.3 and the gateways are MGCP.

1 REPLY
New Member

Re: FXS timeout?

So I found the IOS command reference and it sounds like timeouts wait-release is just what I'm looking for. After changing it to 3 seconds, shut/no shut on the port, it's still waiting about 45 seconds before the port clears up.

265
Views
0
Helpful
1
Replies