Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

G726 and ccm

Can Cisco call manager support g726 call from PBX to ip phones?Assuming there are hardware transcoders. I do not see g726 available in the region setting.

4 REPLIES
Green

Re: G726 and ccm

Unfortunetaly, callmanager application does not have the option to choose g726 codec as you already know. But if you exactly tell me the application you are using to integrate with callmanager and what the network topology you have i might figure a possible workaround for you.

New Member

Re: G726 and ccm

Currently customer has the following scenario:

PBX-PRI-R0--IP--R1-PRI-PBX

G726 is the codec in the IP cloud. Now CCM will be brought into the scenario and IP Phone needs talk to PBX phones.

Since CCM does not support G726 there will be a problem between the IP phones to PBX phone, right?

Green

Re: G726 and ccm

Correct, you may put another device in the middle. That do the transcoding inside the box like any Linux PBX (*).

New Member

Re: G726 and ccm

I have another solution now:

add a 2nd codec prefernece G729 on the gw dial peer so that it can use this codec prefrerence to establish call with CCM which has G729 for IP Phones. Is this good?

143
Views
0
Helpful
4
Replies