Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

g726 Codec on Cisco Unified Communications Manager and CMExpress

Dear Community,

I have been requested to explore the possibility of using G.726 codec within and between regions on Corporate Telephony System that involves CUCM8.5, CUCM6.1 and a couple of Call Manager Express.

I was wondering if g726 is available on the CUCM, since on the Region field under the Max Audio Bit Rate drop down list, g726 is not listed. Is it supported and if not am I missing something?

It seems strange to me not to be listed, since for example on a Call Manager Express (other site) we have the option to list the codecs as following:

!

voice class codec 1

codec preference 1 g711ulaw

codec preference 2 g711alaw

codec preference 3 g729r8

codec preference 4 g729br8

codec preference 5 g726r32

!

Apologies if I am missing something,

Many thanks for your prompt responses!!

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

g726 Codec on Cisco Unified Communications Manager and CMExpress

G.726 is not a good choice because is not supported by the phones.

G.729 or Ilbc if you have phones supporting it, are the best options for low bandwidth.

2 REPLIES
Hall of Fame Super Gold

g726 Codec on Cisco Unified Communications Manager and CMExpress

G.726 is not a good choice because is not supported by the phones.

G.729 or Ilbc if you have phones supporting it, are the best options for low bandwidth.

g726 Codec on Cisco Unified Communications Manager and CMExpress

Paolo thanks a lot for your prompt reply.

Kind regards,

George

918
Views
0
Helpful
2
Replies