I'm having a hard time finding information on configuring the DSP chip to transcode an incoming G729 SIP trunk call to the G711 CUE SIP trunk. Here are the commands on the CME I have regarding transcoding. What am I missing? This is an all CME config, no CCM involved.
Ok, I got it working on two 2851's and a 3845, but on my 2 2801's I can't put the "dspfarm" command under the voice-card 0. This is the only difference in the config, but the PVDM's won't associate. The reason for the command not being there, I figure is because the 2801 doesn't have an NM slot? Possibly the reason for the non-association is due to PVDM2-8 & 16 on the 2801 vs. PVDM2-64 on the others? Let me know if you have any ideas.
Dspfarm Profile Configuration
Profile ID = 1, Service = TRANSCODING, Resource ID = 1
Profile Description :
Profile Service Mode : Non Secure
Profile Admin State : UP
Profile Operation State : RESOURCE ALLOCATED
Application : SCCP Status : NOT ASSOCIATED
Resource Provider : FLEX_DSPRM Status : UP
Number of Resource Configured : 2
Number of Resource Available : 2
Codec : g711ulaw, Maximum Packetization Period : 30
Codec : g711alaw, Maximum Packetization Period : 30
Codec : g729ar8, Maximum Packetization Period : 60
Codec : g729abr8, Maximum Packetization Period : 60
Codec : g729r8, Maximum Packetization Period : 60
SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED
Hi, I'm trying to get this to work on my 2821 with an NME-CUE and CUCM 7.1.
I think I've got as far as above but how do I tell the phone to use the transcoder? I've set it up as under 'Transcoder' and 'Cisco IOS Enhanced Media Termination Point' and added it to the MRG with device pool of the phones and added the CTI ports into the group.
My CIPC can hear unity but my 7941G just gets silence when calling unity.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...