I have a set up whereby I have a gatekeeper and a GW, I`ve configured a RL in CCM which points to the GW as a test if the GK is busy. I`ve tested the second routed manually by changing the order in the RL in CCM. I then set the bandwidth total in the GK to 15 and made a test call but the call did not overflow to the second route group as I thought and I received busy. I changed the H323 STOP ROUTING ON BUSY to False but the call still failed- what I`m I missing, should it work ? Many thanks
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4