Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Gatekeeper concept

Folks,

I have a ccme and a callmanager connected via a Gatekeeper, I am unabe to call from the ccme to the callmanager without using the default technology prefix. I am using the zone prefix for the callmanager but the call does not route to the callmanager, My question is that why do i need a default technology prefix when i do have a zone prefix for the callmanager, is that not enough to route the call to the callmanager.

Gatekeeper

zone local ccm cisco.com 10.10.10.10

zone local ccme cisco.com

zone prefix ccm 2...

zone prefix ccme 4...

no shutdown

Thanks,

Parwal

1 REPLY
VIP Super Bronze

Re: Gatekeeper concept

Technology prefix are used by gatekeeper to identify which endpoint it should route calls to.

Zone prefix defined the digits that are dialled. The gatekeeper uses both technology prefix and zone prefix to route calls.

Have a read on this great document..Its the best I have read on gatekeepers

http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a00800a8928.shtml

HTH, pls rate useful posts

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
136
Views
0
Helpful
1
Replies
CreatePlease login to create content