If a GK have a bunch of end h323 terminals registered to it and you don't want the call to directly call each other for the purpose rating/accounting purpose that the call needs to signal a billing platform, how can I force GK when Site1 dial Site 2 that the call needs to signal the billing platform? The only way we can think of is to prefix some digits when the user dial so the GK default technology path for unresolvable call is to the IPIPGWY and then we can strip it off at that point
Billing Platform/LCR GWY/ETC
Our GK is configured with a simple 1 zone. Would defining a zone of 285XXXX to point to IPIPGWY solve our problem? I'm assuming GK would not route the call to a different zone if it see the endpoints registered to it already.
I believe so too, if the extensions are registered with the Gatekeeper, it will send the call. You can go ahead with the zone prefix route, in which case you won't need to have the extensions registered with GK.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...