Is it possible to register two CUCM to one gatekeeper and properly route calls between them.
CUCM 4.3 ---> GATEKEEPER <----- CUCM 6.0
CONFIG:
gatekeeper
zone local Cisco2811_GK1 cisco.com 172.24.1.250
zone local Cisco2811_GK2 cisco.com
zone prefix Cisco2811_GK2 561....... gw-priority 5 CUCM60
zone prefix Cisco2811_GK1 704....... gw-priority 5 CUCM43
gw-type-prefix 1#* default-technology
arq reject-unknown-prefix
lrq forward-queries
no shutdown
The Gatekeepers are registered properly in the router but I can only make calls from one CUCM 6.0 cluster to the CUCM 4.3 cluster not the other way.
Cisco2811_GK#sh gateke end
GATEKEEPER ENDPOINT REGISTRATION
================================
CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags
--------------- ----- --------------- ----- --------- ---- -----
172.24.1.10 36555 172.24.1.10 32790 Cisco2811_GK2 VOIP-GW
H323-ID: CUCM60_1
Voice Capacity Max.= Avail.= Current.= 0
172.24.1.20 3346 172.24.1.20 2973 Cisco2811_GK1 VOIP-GW
H323-ID: CUCM43_1
Voice Capacity Max.= Avail.= Current.= 0
Total number of active registrations = 2
Any help would be appreciated. Thanks!
