Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Gatekeeper Issue

Is it possible to register two CUCM to one gatekeeper and properly route calls between them.

CUCM 4.3 ---> GATEKEEPER <----- CUCM 6.0

CONFIG:

gatekeeper

zone local Cisco2811_GK1 cisco.com 172.24.1.250

zone local Cisco2811_GK2 cisco.com

zone prefix Cisco2811_GK2 561....... gw-priority 5 CUCM60

zone prefix Cisco2811_GK1 704....... gw-priority 5 CUCM43

gw-type-prefix 1#* default-technology

arq reject-unknown-prefix

lrq forward-queries

no shutdown

The Gatekeepers are registered properly in the router but I can only make calls from one CUCM 6.0 cluster to the CUCM 4.3 cluster not the other way.

Cisco2811_GK#sh gateke end

GATEKEEPER ENDPOINT REGISTRATION

================================

CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags

--------------- ----- --------------- ----- --------- ---- -----

172.24.1.10 36555 172.24.1.10 32790 Cisco2811_GK2 VOIP-GW

H323-ID: CUCM60_1

Voice Capacity Max.= Avail.= Current.= 0

172.24.1.20 3346 172.24.1.20 2973 Cisco2811_GK1 VOIP-GW

H323-ID: CUCM43_1

Voice Capacity Max.= Avail.= Current.= 0

Total number of active registrations = 2

Any help would be appreciated. Thanks!

1 REPLY
Silver
118
Views
0
Helpful
1
Replies