Gatekeeper not sending 00XX* called number to Accounting server
I have a central gatekeeper configured for many Callmanager clusters. Each cluster configured as zone in the gatekpeeer. We have a connection with the CallAcounting server to send CDR to for the gatekeeper routed calls. The issue is if a zone has a prefix for example: zone Z9721 00972*, The call details are not recording in the ACS server. But the calls are going through without any issue. If I am changing the zone prefix to 972* by removing the "00", we could see the CDR are in the call accounting server. There is no specific configuration in the call accounting server. Issue is that gatekeeper is not sending CDR to ACS server for the 00XX* zone prefixes. Kindly requesting to provide me a solution for this.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...